| 1. | Epoxy structures can be similarly identified .
环氧结构也可以同样地加以鉴识。
|
| 2. | The excess epoxy forms the "compatibility layer" .
过剩的环氧形成“相容层”。
|
| 3. | Two moles of epoxy react with one mole of a-1100 .
两个克分子环氧与一个克分子A1100反应。
|
| 4. | Volatiles should not be added to the epoxies to improve their viscosity .
不应将挥发物加到环氧树脂中去改善它们的粘性。
|
| 5. | A modest clamping pressure is recommended for the epoxies during the cure period .
有人建议在治疗期内对环氧树脂施加中等的夹持压力。
|
| 6. | Epoxy structures can be similarly identified, provided they are not fully alkylagted .
没有完全烷基化的环氧结构也可以同样地加以鉴识。
|
| 7. | The specimens were made from two glass arms joined with a 0.005-in. layer of epoxy adhesive .
制作的试样是把两块玻璃臂用0005时厚环氧粘合剂涂层胶合成的。
|
| 8. | The box girders were to be precast units, bonded together in place at the joints with an epoxy resin .
箱梁采用预制构件，在现场连接处涂以环氧树脂，以粘结成为整体。
|
| 9. | Such thermosetting resins as phenol-formaldehyde resins, ployester resins, and epoxy resins do not belong to this classification .
像酚醛树脂、聚酯树脂和环氧树脂等热固性树脂不属于此类。
|
| 10. | Polybutadienes, epoxy resins, and similar polymers may be used while they are in the viscous or liquid state of prepolymerization .
聚丁二烯，环氧树脂及类似聚合物在粘性状或液体预聚态都是可用的。
|
您当前位置：