| 1. | Three lead wires are soldered to the anchor terminals .
在固定接线端子上焊有三根导线。
|
| 2. | Care must be exercised in attaching the lead wires to the soldering tabs .
在往焊接接线片上焊导线时必须非常小心。
|
| 3. | Joints between reinforcement members can be made satisfactorily with tin solder .
锡焊能够满意地做成加筋构件之间的接头。
|
| 4. | Air distribution piping systems almost invariably use soft copper tubing with soldered fittings .
压缩空气的分配管道系统无例外地都是用焊接管件的铜管。
|
| 5. | Usually, glass insulated terminals are either soldered or cemented into the throughhole in the case .
通常是把玻璃绝缘接线端焊接或者是粘合在壳体上的通孔内。
|
| 6. | The stainless tubing is less likely to kink than copper, but it is harder to solder without an acid treatment .
不锈钢管比铜管不易纠结，但不经酸性处理焊接较困难。
|
| 7. | If you add solder and you can make that circuit substitute for a maze of conventional wiring .
如加上焊料，你就可以使板上面的电路代替那种用旧方法连接起来的迷宫一样的线路。
|
| 8. | When all the gold does not dissolve in the solder brittle failure occurs near the goldsolder interface .
当所有的金不能完全溶解在焊钩中时，就会在金与钩的界面附近发生脆性破坏。
|
| 9. | Flanged straight unions , solder type , stainless steel
不锈钢焊接带法兰直管接头
|
| 10. | Symbol and notation for brazing , soldering and sealing
钎焊封接的代号及标注方法
|
您当前位置：